Products > Power Feeds > Type 200 Power Feed >

Type 200 Power Feed

Type 200 - Knee Feeds

The new Type 200 Power Feed is the latest in a long line of quality power feeds from Servo Products. With 200 in lbs. of torque, the 200 is our most powerful standard power feed made to date. This increase in torque makes it a perfect fit for lifting the heaviest knees on the market. The type 200 is made in the USA with the same reliability and rugged design that Servo Products Company is known for throughout the world.

  • Semi-automated machining on Class 1 mills to 5 hp.
  • Peak Torque (half-wave series motor): to 200 in.- lb. / 22.6 NM torque
  • Intermittent Torque: 150 in.- lb. / 17.0 NM
  • Continuous Torque: 120 in.- lb. / 13.0 NM
  • Variable Feed Rate: .5-12 IPM / 13-305 mm/min (knee).
  • Rapid Traverse: 15 IPM / 381 mm/min (knee)
  • Gear Reduction Ratio (motor to screw shaft): 72:1
  • Helical gearing and torque limiting friction safety clutch with new and improved gear.
  • Electrical: 110V, 50/60 Hz, 4.0A.
  • Approx. weight: 21 lb. / 9.4 kg.

Installation instructions and drawings

NOTE: Servo Products Company has made every effort to provide mounting hardware kits that are as accurate and complete as possible for each machine model. However, machine builders may change their designs without letting us know. Therefore, some kits may not fit properly. Please let us know when this happens. The following Documents are Adobe Acrobat PDF files. Click here for a free copy of Acrobat Reader.

Knee Feeds Note - Various mills such as the Bridgeport Series II, Lagun FTV3 and Deluxe, Alliant RT4V and other large mills are too heavy to lift with a Type 140. The Type 150 can not be used as a knee feed since it will stall under load. Use a Type 200 or a Servo Turbo Drive for heavy knees. To replace a knee feed when you don't need the mounting hardware, use the ECF-140KNEE or ECF-200KNEE.

Hold down the “Shift” Key to open the documents in a new browser window.

Machine

Knee Feed

Base Feed - No mounting hardware included

ECF-200KNEE

GENERAL PURPOSE
(If your mill model is not listed below, you can use this. Also use this for custom machine applications.)

M-2500-200

ACER 3VS 3VK

M-9810-200

ACER after 1992

M-9811-200

ACRA MILL 9 x 42

 

ACRA MILL 9 x 49

 

ACRA MILL 10 x 50

 

ACRA MILL 10 x 54

M-5080-200

ALLIANT

M-3780-200

ALLIANT RT2-50

M-9818-200

ATRUMP

M-9819-200

BIRMINGHAM 942, 1050

M-2380-200

BRIDGEPORT SERIES I (hand fed mill) If you're not sure, see this.

M-0280-200

BRIDGEPORT (replaces electronic feed) For description, see this. If you need information on this model for S/N 564146 or older, see this.

M-0280-200

BRIDGEPORT (replaces gear box feed) For description, see this.

M-0280-200

BRIDGEPORT 12" CROSS TRAVEL

M-0280-200

BRIDGEPORT 9" CROSS TRAVEL

M-0280-200

BRIDGEPORT SERIES II

see Turbo Drive

BRIDGEPORT SERIES II SPECIAL

see Turbo Drive

BRUTE 9 x 42, 9 x 49

M-0280-200

BRUTE 10 x 50

 

CHEVALIER, LARGE & SMALL

M-5081-200

CLAUSING ATLAS / KALAMAZOO

 

CLAUSING KONDIA

M-1380-200

CLAUSING KONDIA FV-300

 

CLAUSING 400EVS, 450EVS, 500EVS

M-3580-200

COMET INCH (.625 dia lead screw)

 

COMET METRIC (.630 dia lead screw)

 

COMET 9 x 42, 3VHG, 2SHG

M-9813-200

COMET 10 x 50 3KV

M-9813-200

COMET 10 x 50 3KVHD, 3KVHD-B,

M-9813-200

COMET 10 x 54 4KVHD

M-9813-200

COMET 10 x 50 5KVHD

M-9813-200

CONCORD

 

DO ALL

M-2380-200

EDELSTALL F10V, 401

 

EDISON

 

ENCO 100-1527, 9 x 42

 

ENCO 100-1588, 10 x 54

 

ENCO 231

 

ENCO 249

 

ENTERPRISE

 

EXACTO

M-2380-200

EX-CELL-O 602 (no coolant trough)

M-0880-200

EX-CELL-O 602 (w/coolant trough)

M-0880-200

FIRST YAMAZEN

 

HARTFORD

 

HOLKE MACHINIST

 

HOLKE S/N 5172 UP

 

HURCO SM1

M-1380-200

INDEX 45, 645, 745

 

INDEX 747, 847, 860, 887

M-0980-200

JET 1048 VS

 

JET Y

 

JOHNFORD MV54

M-5680-200

KENT 2S

M-5580-200

KENT 3VK, 4VK, 5VK

M-9808-200

KENT 5KV

M-5580-200

KINGSTON KTM 3V

M-9808-200

KONDIA G & FV1

M-1380-200

KONDIA 2

 

LAGUN

M-1580-200

LAGUN FTV3

see Turbo Drive

MARENA 942

 

MARENA 10

 

MAXMILL

M-2380-200

MICROCUT

M-4280-200

MILLPORT 2S, 3V, 3VH

M-0280-200

MILLPORT K MILL

M-0280-200

MILLPORT 10 x 50

 

NEWPORT

 

SELECT 1VB (.630 dia lead screw)

 

SELECT 1VB (.625 dia lead screw)

 

SELECT 1VBVS

 

SERVO SV50

M-9822-200

SERVO SV54

M-9824-200

SHARP FIRST, LMV, LCS

M-3780-200

SHARP HMV, OMV, QMV1, QMV2, TMV

M-4380-200

SHARP 1-1/2 YC

 

SHARP VIA

 

SIBER HEGNER RB1

 

SOUTH BEND IMPORT

 

SOUTH BEND 2 HP

 

SOUTH BEND 3 HP

 

SOUTH BEND / SE+5-DIGIT SER. #

M-9818-200

SOUTHWESTERN TRAK TRM

M-9815-200

SUPERMAX 1-1/2 , 16KV

M-2380-200

SUPERMAX 16VA

M-9804-200

TOPWELL

 

VICTOR VSK or VK

 

VICTOR, 16 VSK or VK

M-5080-200

VICTOR, 380 VSK or VK

M-5980-200

WEBB

 

WEBB CHAMP

 

WEBB CHAMP 1-1/2 (before Jan '91)

M-0280-200

WEBB CHAMP 1-1/2 (after Jan '91)

M-9808-200

WELLS INDEX 747, 847, 860, 889

see Index

WELLS INDEX 837

M-4280-200

WILLIS MICRO CUT