Products > Power Feeds > Turbo Power Feed >

Type 350X Power Feed
350 Inch Lbs. Of Torque!

Our team of engineers have created our most powerful and efficient unit yet. Keeping the same compact design, we have reengineered our internal components to increase safety and versatility while improving performance.


Type 350X - Knee, Table, and Cross Feeds

  • Semi-automated machining on Class 1 mills to 5 hp.
  • Peak torque (brushless DC motor): to 740 in-lb / 83.6 NM torque.
  • Intermittent torque: 575 in-lb / 65.0 NM.
  • Continuous torque: 350 in-lb / 39.6 NM @ < .5 inch per minute
  • Variable feed rate: .40-32 ipm / 10-813 mm/min. (table and cross); .20-16 ipm / 5-406 mm/min. (knee).
  • Rapid traverse: 32 ipm / 813 mm/min. (table and cross); 16 ipm / 406 mm/min. (knee).
  • Gear reduction ratio (motor to screw shaft): 72:1.
  • Industry 1st safety E-Stop button with safety control logic.
  • 75% more energy efficient than any current brushed DC motor.
  • Advanced speed control for precision feed rates no matter what load.
  • Dynamic braking for quick stops prevents any coasting.
  • Ability to switch feed directions without having to pause for feed to stop.
  • Helical gearing with new and improved gear, plus current monitoring microprocessor circuitry.
  • Ability to switch from a table position to knee or vice versa in less than 2 minutes.
  • No risk of stripping or damaging the large drive gear thanks to sophisticated electronics.
  • No motor brushes requiring service or replacement, therefore no carbon dust for clean room applications.
  • All this results in a much lower projected cost of ownership over a 5-year period.
  • The only 2-year warranty in the industry, no other manufacturer comes close.
  • Electrical: 110V, 50/60 Hz, 4.5 Amps., 220v, 50/60 Hz, 2.25 Amps (dual voltage capability with internal jumper change)
  • Approximate weight: 9.3 lb. / 4.2 kg.
Type 350X power feed

Installation instructions and drawings

NOTE: Servo Products Company has made every effort to provide mounting hardware kits that are as accurate and complete as possible for each machine model. However, machine builders may change their designs without letting us know. Therefore, some kits may not fit properly. Please let us know when this happens. The following Documents are Adobe Acrobat PDF files. Click here for a free copy of Acrobat Reader.

Knee Feeds Note - The Type 350X is best choice for lift mills with heavy knees. Various mills such as the Bridgeport Series II, Lagun FTV3 and Deluxe, Alliant RT4V and other large mills are too heavy to lift with a Type 140. The Type 150 can not be used as a knee feed since it will stall under load. Use a Type 350X or Type 200 for heavy knees. To replace a knee feed when you don't need the mounting hardware, use the ECF-350X, ECF-140KNEE or ECF-200KNEE.

Hold down the “Shift” Key to open the documents in a new browser window.

Machine

Table Feed

Cross Feed

Knee Feed

Base Feed - No mounting hardware included

ECF-350X

ECF-350X

ECF-350X

GENERAL PURPOSE
(If your mill model is not listed below, you can use this. Also use this for custom machine applications.)

K-2500

K-2500

K-2500

ACER 3VS 3VK

K-9108

K-9508

K-9810

ACER after 1992

K-9108

K-9508

K-9811

ACRA MILL 9 x 42

 

K-5051

 

ACRA MILL 9 x 49

K-5000

 

 

ACRA MILL 10 x 50

 

K-5050

 

ACRA MILL 10 x 54

K-5000

K-5050

K-5080

ALLIANT

K-3700

K-3750

K-3780

ALLIANT RT2-50

K-9118

K-9518

K-9818

ATRUMP

K-3700

K-9519

K-9819

BIRMINGHAM 942, 1050

K-9109

K-9508

K-2380

BRIDGEPORT SERIES I (hand fed mill) If you're not sure, see this.

K-0200

 

K-0280

BRIDGEPORT (replaces electronic feed) For description, see this. If you need information on this model for S/N 564146 or older, see this.

K-0206

 

K-0280

BRIDGEPORT (replaces gear box feed) For description, see this.

K-0225

 

K-0280

BRIDGEPORT 12" CROSS TRAVEL

 

K-0250

K-0280

BRIDGEPORT 9" CROSS TRAVEL

 

K-0251

K-0280

BRIDGEPORT (After Aug 2010)

 

K-0253

 

BRIDGEPORT (After 2020 - Hardinge)

 

K-0254

 

BRIDGEPORT SERIES II

K-9114

K-9514

K-9814

BRIDGEPORT SERIES II SPECIAL

K-9114

K-9514

K-9814

BRUTE 9 x 42, 9 x 49

K-0200

K-0250

K-0280

BRUTE 10 x 50

K-2700

K-4650

 

CHEVALIER, LARGE & SMALL

K-9117

K-9517

K-5081

CLAUSING ATLAS / KALAMAZOO

K-9130

K-9530

K-9819

CLAUSING KONDIA

K-4900

K-4950

K-1380

CLAUSING KONDIA FV-300

K-3900

K-3950

 

CLAUSING 400EVS, 450EVS, 500EVS

K-3700

K-3550

K-3580

COBRA

K-3700

 

 

COMET INCH (.625 dia lead screw)

K-2700

 

 

COMET METRIC (.630 dia lead screw)

K-2300

 

 

COMET 9 x 42, 3VHG, 2SHG

 

K-0250

K-9813

COMET 10 x 50 3KV

K-3800

 

K-9813

COMET 10 x 50 3KVHD, 3KVHD-B,

 

 

K-9813

COMET 10 x 54 4KVHD

 

 

K-9813

COMET 10 x 50 5KVHD

 

 

K-9813

CONCORD

K-5000

 

 

DO ALL

K-2300

K-2350

K-2380

EDELSTALL F10V, 401

K-2100

 

 

EDISON

K-6600

 

 

ENCO 100-1527, 9 x 42

K-9100

 

 

ENCO 100-1588, 10 x 54

K-9100

 

K-3780 

ENCO 231

K-9100

 

 

ENCO 249

K-9100

 

 

ENTERPRISE

K-2100

K-2150

 

EXACTO

K-2300

K-2350

K-2380

EX-CELL-O 602 (no coolant trough)

K-0800

K-0850

K-0880

EX-CELL-O 602 (w/coolant trough)

K-0801

K-0850

K-0880

FIRST YAMAZEN

K-2700

 

 

HARTFORD

K-2700

K-2750

 

HOLKE MACHINIST

K-2100

K-2150

 

HOLKE S/N 5172 UP

K-4500

K-2150

 

HURCO SM1

K-1300

K-1350

K-1380

HURCO SM2

K-3900

K-3950

 

INDEX 45, 645, 745

K-0901

 

 

INDEX 747, 847, 860, 887

 

 

K-0980

JET 1048 VS

K-0200

 

 

JET Y

K-3000

 

 

JOHNFORD MV54

K-5600

K-5650

K-5680

KENT 2S

K-9109

K-9509

K-5580

KENT 3VK, 4VK, 5VK

K-9108

K-9508

K-9808

KENT 5KV

 

 

K-5580

KINGSTON KTM 3V

K-9108

K-9508

K-9808

KONDIA G & FV1

K-1300

K-1350

K-1380

KONDIA 2

K-3900

K-3950

 

LAGUN

K-1500

K-1550

K-1580

LAGUN FTV3

K-1501

 

K-1582?

MANFORD

K-0200

 

 

MARENA 942

K-2700

 

 

MARENA 10

K-2100

K-2150

 

MAXMILL

K-2300

K-2350

K-2380

MICROCUT

K-4200

K-4250

K-4280

MILLPORT 2S, 3V, 3VH

K-2700

K-0250

K-0280

MILLPORT K MILL

K-2700

 

K-0280

MILLPORT 10 x 50

 

K-4750

 

NEWPORT

K-2700

K-2750

 

SELECT 1VB (.630 dia lead screw)

K-2300

 

 

SELECT 1VB (.625 dia lead screw)

K-0200

 

 

SELECT 1VBVS

K-0200

 

 

SERVO SV50

K-9122

K-9522

K-9822

SERVO SV54

K-9122

K-9522

K-9824

SHARP FIRST, LMV, LCS

K-3700

K-3750

K-3780

SHARP HMV, OMV, QMV1, QMV2, TMV

K-4300

K-4350

K-4380

SHARP 1-1/2 YC

K-2300

 

 

SHARP VIA

K-2700

 

 

SIBER HEGNER RB1

K-3700

K-4850

 

SOUTH BEND IMPORT

K-0200

 

 

SOUTH BEND 2 HP

 

K-0250

 

SOUTH BEND 3 HP

 

K-1350

 

SOUTH BEND / SE+5-DIGIT SER. #

K-9118

K-9518

K-9818

SOUTHWESTERN TRAK TRM

 

 

K-9815

SUMMIT EVS-350

K-0200

K-0250

K-2380

SUPERMAX 1-1/2 , 16KV

K-4400

K-2350

K-2380

SUPERMAX 16VA

 

 

K-9804

TOPWELL

K-5300

 

 

VICTOR VSK or VK

K-9012

 

 

VICTOR, 16 VSK or VK

K-6500

K-6550

K-5080

VICTOR, 380 VSK or VK

 

 

K-5980

WEBB

K-2700

 

 

WEBB CHAMP

K-2700

K-4650

 

WEBB CHAMP 1-1/2 (before Jan '91)

 

 

K-0280

WEBB CHAMP 1-1/2 (after Jan '91)

 

 

K-9808

WELLS INDEX 747, 847, 860, 889

K-1840

 

 

WELLS INDEX 837

K-4200

K-4250

K-4280

WILLIS MICRO CUT

 

K-9501