 | | | Distributor Locator | | Drill Presses |
|
| | Unique Offset Column Drill Press |
| | For a wide work piece, such as a PC board. Drill to center of a 17" circle. Available with Albrecht chuck and inch or metric calibration. | - Inch and Metric versions
- Drill holes down to 0.002” / 0.05mm Dia.
- Spindle runout: 0.0002" / 0.005 mm TIR
- High accuracy down stop for drilling depth control
(0.001” / 0.05mm per division) - Variable speed spindle (200-20,000 RPM)
- Quill travel (stroke): 1.5” / 38.1mm
- Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm
- WW collet versions for less run out and improved accuracy;
0.0039"-0.252" / 0.1-6.4 mm collet sizes available - Graduated dial gauge for depth control
(0.001” / 0.05mm per division) - Wide selection of bases and accessories
- Drill capacity:to 1/16" in inconel
to 1/8" in steel
to 3/16" in aluminum (collet only) - Electrical: 115 volts AC, 50/60 Hz, 2 amps
(220V/115V transformer available)
| | | | Standard Drill Press Models
7000/7100
7010/7110
7050/7150
7060/7160 | Drill Press with Unique Offset Column
7030/7130 | Drill Press with Elbow and Deep Throat
7040/7140
7070/7170 |
|
| I=Inch; M=Metric
[ ] = See drawings | 7000-I
7100-M | 7010-I
7110-M | 7050-I
7150-M | 7060-I
7160-M | 7030-I
7130-M | 7040-I
7140-M | 7070-I
7170-M | Chuck or collet | Chuck | Chuck | Collet | Collet | Chuck | Chuck | Collet | Maximum distance of chuck/collet to base[a] | 6"
152 mm | 13"
330 mm | 7.5"
190 mm | 14.5"
368 mm | 6"
152 mm | 16.5"
419 mm | 18"
457 mm | Throat depth [b]
(spindle CL to column) | 3.5"
89 mm | 3.5"
89 mm | 3.5"
89 mm | 3.5"
89 mm | 8.5"
216 mm | 9.4"
239 mm | 9.4"
239 mm | Working base area (width) [c] | 6.5"
165 mm | 6.5"
165 mm | 6.5"
165 mm | 6.5"
165 mm | 9.75"
248 mm | 9.75"
248 mm | 9.75"
248 mm | Working base area (depth) [d] | 6.5"
152 mm | 6.5"
152 mm | 6.5"
152 mm | 6.5"
152 mm | 13.25"
324 mm | 13.25"
324 mm | 13.25"
324 mm | Column diameter through head [e] | 1.25"
31 mm | 1.25"
31 mm | 1.25"
31 mm | 1.25"
31 mm | 1.25"
31 mm | 1.25"
31 mm | 1.25"
31 mm | Column diameter through elbow [f] | -
- | -
- | -
- | -
- | -
- | 1.625"
41 mm | 1.625"
41 mm | Column length [g] | 12"
305 mm | 19"
483 mm | 12"
305 mm | 19"
483 mm | 7.5"
191 mm | 18"
457 mm | 18"
457 mm | Footprint width | 7.15"
181 mm | 7.15"
181 mm | 7.15"
181 mm | 7.15"
181 mm | 10.5"
267 mm | 10.5"
267 mm | 10.5"
267 mm | Footprint depth | 11.8"
299 mm | 11.8"
299 mm | 11.8"
299 mm | 11.8"
299 mm | 18.5"
470 mm | 18.5"
470 mm | 18.5"
470 mm | Overall height | 18"
457 mm | 25"
635 mm | 18"
457 mm | 25"
635 mm | 18"
457 mm | 29.5"
749 mm | 29.5"
749 mm | Weight | 21#
9.5 kg | 21#
9.5 kg | 21#
9.5 kg | 21#
9.5 kg | 27#
12.2 kg | 40#
18.1 kg | 40#
18.1 kg | Base | Fine grain, ground cast iron base | Fly-cut cast aluminum base with fine grain cast iron offset and elbow |
|
|
|
| | Specifications, Technical Information, and Price List |  Focus On: The Model 708 Micro-driller
Describes how the micro-driller allows you to automate the process of hole drilling, especially peck drilling, on a SERVO drill press
Focus On: Small Hole Drilling
An introduction to small hole drilling practices. It covers topics such as drill runout, cutting tool feeds and speeds, materials, drills, and cutting fluids. Drill press head exploded drawing and parts list
This is a 4-page document with all the drill press parts identified on an exploded drawing of the drill press head. Drill Press Service Center Locations | |
|
|
